Steel Balustrade
The Steel Balustrade is a fully welded metal railing with square posts, a wide flat handrail and evenly spaced horizontal bars in square-section steel. Fixing plates are welded to the posts and pre-drilled for anchors; the views show them side-mounted.
It suits internal landings and mezzanines as well as terraces, walkways, pool surrounds and retaining walls. As standard the bars are 20 x 20 mm square steel with a clear gap of no more than 100 mm, and a denser layout with smaller gaps is made on request. Tell us where it will stand and who will use it, and we advise on the spacing; if horizontal infill does not suit the location, we suggest another option from the range.
The reference section is a straight 2000 mm run at 1000 mm height, and we build any run length, corners, returns and stepped levels. Glass infill can replace the bars and is priced separately. The finish is powder coating in any RAL colour; for outdoor runs we recommend hot-dip galvanising, plain or powder coated.
Order the standard 2000 mm section at the price shown, or send the run length and height for a quotation; we reply within 24 hours on working days. A photo of the location helps: send it to [email protected] or through the enquiry form on this page. Sections arrive welded to your run, ready to bolt into place. Side mounting is standard and top mounting is available on request; we agree the anchors for your substrate with you before production.
Steel balustrade with horizontal infill
The workhorse of the range: a fully welded steel balustrade with square posts, a wide flat handrail and evenly spaced horizontal bars in square-section steel. It suits almost anywhere a guard is needed, from internal landings and mezzanines to terraces, walkways, pool surrounds and the tops of retaining walls. Square section gives crisp architectural lines, and the deep handrail sits solidly in the hand.
Standard or denser spacing
As standard the infill is 20 x 20 mm square steel bars with a clear gap of no more than 100 mm, and a denser layout with smaller gaps is made on request. Tell us where the balustrade will stand and who will use it, and we advise on the spacing. If horizontal infill is not the right choice for your location, we will point you to a better option from the range.
Made to measure, configured to your project
The price shown covers a straight 2000 mm section at 1000 mm height. Every balustrade is fabricated to your plan: any run length, corners, returns and stepped levels, with post spacing set so the fixing plates land on sound fixing points. Prefer glass? A glass infill can be specified instead of bars and is priced separately.
Construction and materials
- Square posts and flat handrail in structural steel
- Horizontal square-section bars at even spacing
- Steel fixing plates welded to the posts, pre-drilled for anchors; the views show them side-mounted
- Welds cleaned and ground before finishing
Finish
Powder coating in any RAL colour. For outdoor runs we recommend hot-dip galvanising, plain or with a powder-coated top layer in your colour, for a long service life.
What is included
- Balustrade sections welded to your measured run, ready to bolt into place
- Posts with pre-drilled fixing plates
- Finish in your chosen RAL colour or hot-dip galvanised
Anchors depend on the substrate: concrete, steel and timber each need a different fixing, so we recommend the right one and agree it with you before production. Side mounting is standard; top mounting is available on request.
See also
Modern Balcony Railing with Horizontal Bars and Outdoor Stair Railing.
Ordering
Order the standard version at the price shown, or send the run length and height for a quotation; a photo of the location helps: send it to [email protected] or through the enquiry form on this page. We confirm your order within 2 working days without changing the price or the delivery cost, and you pay by bank transfer after our confirmation. If you are unsure, ask through the enquiry form on this page or at [email protected] before ordering. Collect your order free of charge from our workshop, or choose delivery in Poland, Spain, Italy or the United Kingdom at the flat rate shown at checkout (for the UK, import VAT and duty are paid on arrival); delivery to other countries is by quotation. Products ordered in the shop are ready for collection within 7 weeks of your order, or delivered in Poland, Spain, Italy or the United Kingdom, or by courier in Germany, within 9 weeks, if our order confirmation reaches you by the end of the second working day after your order and you pay within 7 days of receiving it; if it reaches you later, these times run from the day your payment arrives.
-
ReferenceBW-Steel-Balustrade
-
DispatchShips within 8 weeks
-
MaterialWelded steel
-
Height1000 mm
-
FinishHot-dip galvanised
Powder-coated, any RAL colour -
MountingSide-mounted on welded plates; top mounting on request; anchors for concrete, steel or timber
-
InfillGlass
Square steel bars 20 x 20 mm, max. 100 mm clear gap -
PostsSquare steel posts with welded fixing plates, shown side-mounted
-
Made to measureAny length on request
-
Default length2000 mm
-
TypeBalcony and terrace railing
-
Safety noteHorizontal infill is climbable.
Card payments are processed over an encrypted connection.
Parcel, pallet or freight delivery to any country.
Every piece is fabricated to your dimensions, to order.
Be the first to share your experience with this product.
Please sign in to leave a review.