Steel Entrance Canopy

Price: €540.00
No tax

The Steel Entrance Canopy is a welded steel door canopy with a solid roof of ribbed sheet steel, carried on two curved brackets fixed to the wall. Nothing stands in front of the door, so the entrance stays clear.

The roof sits in a welded angle-section frame of S235 steel, with the welds dressed before finishing. A built-in fall takes rain to the front, where a drip edge sheds it away from the door. The brackets are fully welded, with pre-drilled wall plates.

The base size of 1600 x 1100 mm (width x projection) suits most front doors, and every canopy is welded to order. Wider versions cover double doors, side entrances and shopfronts, with extra brackets on longer spans, and the projection can be deeper where the entrance faces driving rain. The steel is protected against corrosion, then powder coated in any RAL colour.

Order the standard version at the price shown; for another size, ask for a quotation, giving the door width and the projection you want. A photo of the wall helps: send it to [email protected] or through the enquiry form on this page. We reply within 24 hours on working days. We agree the bracket shape and fixing method for your wall with you by email before production; another size or roof pitch is made to measure by quotation. Brackets, wall plates and anchors for your wall type are included.

Product availability: Made to order: ships within 8 weeks

Photo, scan or hand drawing. We draw the technical diagram.

Share
Made to measure
Secure checkout
Worldwide delivery
Direct from the workshop

Shelter for your entrance, welded from steel

The Steel Entrance Canopy is a simple, durable door canopy with a clean architectural line. A sheet-steel roof with pressed stiffening ribs sits in a welded perimeter frame, carried by two curved gusset brackets fixed to the wall. Nothing stands in front of the door, so the entrance stays clear.

The solid sheet-metal roof is the version built to keep the weather off: the roof falls towards the front edge and a drip edge sheds water away from the door. If you prefer a light, open frame without a covering, see the open canopy frame linked below.

Made to measure for your door

The base size is 1600 mm wide with an 1100 mm projection, a format that suits most front doors. Every canopy is welded to order:

  • wider spans over double doors, side entrances and shopfronts, with extra brackets on longer runs,
  • deeper projection where the entrance faces driving rain,
  • matching pairs for front and back doors,
  • bracket shape and roof pitch chosen to suit the facade.

Materials and construction

  • Ribbed sheet-steel roof set in a welded angle-section frame
  • Front drip edge
  • Curved triangular gusset brackets, fully welded, with pre-drilled wall plates
  • S235 structural steel, welds dressed before finishing
  • Built-in fall so water never stands on the roof

Finish

The steel is protected against corrosion and then powder-coated in the RAL colour of your choice. For entrances exposed to a lot of weather we recommend hot-dip galvanising under the powder coat, which also protects the inside of the sections. Matte black and anthracite match most windows and gutters, but we will match the colour to your facade.

What's included

  • Welded canopy with sheet-metal roof in your chosen size and colour
  • Brackets with wall plates
  • Anchors selected for your wall type, such as masonry or concrete

Exact size, roof pitch and fixing method are confirmed before fabrication.

Ordering

Order the standard version at the price shown; for another size, ask for a quotation, giving the door width and the projection you want. A photo of the wall helps: send it to [email protected] or through the enquiry form on this page. We confirm your order within 2 working days without changing the price or the delivery cost, and you pay by bank transfer after our confirmation; if you are unsure, ask before ordering. Collect the canopy free of charge from our workshop, or choose delivery in Poland, Spain, Italy or the United Kingdom at the flat rate shown at checkout (for the UK, import VAT and duty are paid on arrival); delivery to other countries is by quotation. See also: Open Steel Entrance Canopy Frame.

  • Reference
    BW-CANOPY-AWNING
  • Dispatch
    Ships within 8 weeks
  • Material
    Welded steel
  • Width
    1600 mm
  • Finish
    Powder-coated, any RAL colour
  • Mounting
    Wall-mounted
  • Projection
    1100 mm
  • Pitch
    Sloped for run-off
  • Type
    Entrance canopy
  • Roof
    Solid roof
No product reviews yet

Be the first to share your experience with this product.

Please sign in to leave a review.

Have a question about this product? Ask about sizes, finishes or delivery.
155 questions
23 categories
Secure payment

Card payments are processed over an encrypted connection.

Worldwide delivery

Parcel, pallet or freight delivery to any country.

Made to measure

Every piece is fabricated to your dimensions, to order.

4 other products in the same category

Viewed products

Loading...
Back to top