French Balcony Railing with Horizontal Profiles, Face-Mounted
This French or Juliet balcony with horizontal profiles is the face-mounted version, for a floor-to-ceiling window or French door. Wide 80 x 20 x 2 mm rectangular steel profiles run between two slim vertical posts, so the guard reads as horizontal lines, not a fence of bars.
The posts stand on the outside of the wall, in front of the opening, anchored through fixing plates into the masonry or concrete behind the render. It suits walls without a thick insulation layer and leaves the window reveal and sill untouched.
Each guard is welded to fit the measured opening, with width, height, number of profiles, gaps and post position set for it. Steel is hot-dip galvanised and powder-coated or wet-painted in any RAL colour; welded aluminium makes a lighter guard and is powder-coated or wet-painted in the same range.
Anchors for concrete, brick or block are included. Order the default 1500 x 1100 mm guard at the price shown; for another opening, send its size and what the wall is built from for a quotation, and we reply within 24 hours on working days. A photo of the window from outside helps: send it to [email protected] or through the enquiry form on this page. Name your colour in the order comment at checkout. Collect in person, free of charge, or choose delivery in Poland, Spain, Italy or the United Kingdom at the flat rate shown at checkout (for the UK, import VAT and duty are paid on arrival); delivery to other countries is by quotation.
The horizontal look, fixed to the face of the wall
Horizontal profiles have become the signature line of modern facades, and this French balcony brings that line to a floor-to-ceiling window or French door. Wide 80 x 20 x 2 mm rectangular profiles run between two slim vertical posts, so the guard reads as a few strong horizontal strokes rather than a fence of bars. From the street it looks light and architectural; from inside the room it keeps the view open.
This is the face-mounted version. The posts sit on the outside of the wall, in front of the opening, and are anchored through fixing plates into the masonry or concrete behind the render. It is the straightforward choice for walls without a thick insulation layer, and it leaves the window reveal and sill untouched.
Made to measure for your opening
Every guard is welded to the measured opening, so it sits square and centred on the window rather than being cut from a standard length. We adapt:
- width and height to your opening and the guard height that applies to your building,
- the number of horizontal profiles and the gaps between them,
- the post position and the projection from the wall,
- the fixing pattern, matched to the wall material.
Materials and construction
- Horizontal infill in 80 x 20 x 2 mm rectangular profile
- Vertical posts with welded fixing plates
- Fully welded frame, ground clean at the joints
- Steel, or welded aluminium for a lighter, rust-free guard
- Anchors selected for concrete, brick or block
Finish
Steel guards are hot-dip galvanised and powder-coated or wet-painted in the RAL colour of your choice, a finish built for years of rain and frost on an exposed facade. Aluminium needs no galvanising and is powder-coated or wet-painted in the same range. Anthracite RAL 7016 and matte black RAL 9005 suit most window frames.
What's included
- Welded French balcony guard made to your dimensions
- Fixing plates welded to the posts
- Anchors matched to your wall
- Finish in your chosen RAL colour
Exact dimensions, profile spacing and colour are confirmed with you before fabrication.
Ordering
Order the standard version at the price shown; for your own dimensions and finish, ask for a quotation, giving the opening width and height and a note of what the wall is built from. A photo of the window from outside helps: send it to [email protected] or through the enquiry form on this page. We confirm your order within 2 working days without changing the price or the delivery cost, and you pay by bank transfer after our confirmation. If you are unsure, ask through the enquiry form on this page or at [email protected] before ordering. Collect the balcony free of charge from our workshop, or choose delivery in Poland, Spain, Italy or the United Kingdom at the flat rate shown at checkout (for the UK, import VAT and duty are paid on arrival); delivery to other countries is by quotation. For an insulated facade, see French Balcony Railing with Horizontal Profiles, Anchored Through Insulation.
-
ReferenceBW-FRENCH-BALCONY-HORIZ-FACE
-
DispatchShips within 8 weeks
-
MaterialAluminium
Welded steel -
Width1500 mm (default, made to measure)
-
Height1100 mm (default, made to measure)
-
Profile80 x 20 x 2 mm rectangular steel profile
-
FinishHot-dip galvanised
Powder-coated, any RAL colour -
MountingWall-mounted
-
InfillHorizontal slats
-
Posts40 x 40 x 3 mm square steel posts with welded fixing plates
-
TypeFrench balcony
-
Safety noteHorizontal infill is climbable.
Card payments are processed over an encrypted connection.
Parcel, pallet or freight delivery to any country.
Every piece is fabricated to your dimensions, to order.
Be the first to share your experience with this product.
Please sign in to leave a review.